Thin Plate Handling Systems

Permadur’s Thin Plate Handling Systems are built to support the handling of gauge material thinner than 3/16″ thick. We utilize a special Permadur Electroperm Magnet whose magnetic intensity / depth of field can be reduced or increased depending on the Plate thickness.

These systems are built to:

  • Not drop a suspended load due to loss of electrical power, faulty wiring, or misoperation of controls
  • Consume no power during lift
  • Need no back up Battery System
  • Require no Installation Costs

Permadur Series 612

Through the use of our Permadur BPR-350 ElectroPerm Lifting Magnet, we are able to build Plate Handling Systems that can provide single plate handling off a stack down to 16-18 Ga. plate.

This particular Series 612 System is being used to handle 4×8 and 5×10 plates from 11 ga. to 1” Thick (2100# Max.). As with our other Systems, all that is required is a brief pulse of current to the magnets to turn them ON or OFF. These Magnets will not drop a load due to loss of electrical power.

permadur thin plate handling system series 612 controls permadur thin plate handling system series 612 magnets

Let us do the heavy lifting.

Permadur’s experienced engineering staff is always available to answer your questions about vacuum lifting devices, permanent lifting magnets, and other lifting systems.

Call  908-359-9767 to speak to a Permadur representative today, or fill out our inquiry form.

General Inquiries & Quote Requests

Please submit your information below and a Permadur Customer Service Representative will review the request and contact you shortly.

[contact-form-7 404 "Not Found"]