.fusion-fullwidth-53 {
padding-left: px !important;
padding-right: px !important;
}

Small Plate Handling Systems

Permadur Small Plate Handling Systems are designed to

  • Handle Plates ranging in thickness from Gauge Material to 1″
  • Handle Non-Magnetic Materials and Steel
  • Offer Upender/Downender capability to support taking Plate from horizontal to vertical and vice versa
  • Possess a 3 to 1 Safety Factor with a Backup Vacuum Reservoir
  • Be either Electrically or Air Powered
.fusion-fullwidth-54 {
padding-left: px !important;
padding-right: px !important;
}

Permadur Series 102

These two style Permadur Series 102 Small Plate/Part Handling Systems are built with 2ea. TP-2000 Lifting Magnets suspended on an 6’ load beam with a Shackle/Ring Assembly for attachment to a single hook hoist. The System includes a #547 AC Powered Relay Pushbutton Controller.

The Controller includes Permadur’s Exclusive (-S) Safety Indicator Lighting System to tell the Operator when the Magnets have attached to the load in preparation for a safe lift. The Controller also provides the capability to interface the Controls with ON/OFF Pushbuttons on the Hoist Pendant or Crane Radio Controller.

Both style Systems have the Magnets on Cam Followers to facilitate their repositioning to address changes in Part sizes. Systems with Lead Screws support this repositioning of the Magnets; without it, Systems require manual repositioning.

permadur-small-plate-handling-series-102-S-magnet<img class="alignleft wp-image-2239" src="https://www.permadur.com/wp-content/uploads/2016/10/permadur-small-plate-handling-series-102-S-magnet-2.png" alt="permadur-small-plate-handling-series-102-S-magnet-2" width="200" height="150" srcset="https://www.permadur.com/wp-content/uploads/2016/10/permadur-small-plate-handling-series-102-S-magnet-2.png 278w, http://www sites.permadur.com/wp-content/uploads/2016/10/permadur-small-plate-handling-series-102-S-magnet-2-100×75.png 100w” sizes=”(max-width: 200px) 100vw, 200px” />

Permadur Small Plate Handling Series 102-S1

This individual System has a Lead Screw to support repositioning of the Magnets.

Permadur Small Plate Handling Series 102-S2

These two Systems  require manual repositioning.

.fusion-fullwidth-55 {
padding-left: px !important;
padding-right: px !important;
}

Let us do the heavy lifting.

Permadur’s experienced engineering staff is always available to answer your questions about vacuum lifting devices, permanent lifting magnets, and other lifting systems.

Call  908-359-9767 to speak to a Permadur representative today, or fill out our inquiry form.

General Inquiries & Quote Requests

Please submit your information below and a Permadur Customer Service Representative will review the request and contact you shortly.

<p

Subject:General InquiryIndividual MagnetsPart Handling MagnetsPlate Handling Magnet SystemsMultiple Part Handling Magnet SystemsVacuum SystemsManual MagnetsLoad PositionersService and Repair / Parts