Large Plate Handling Systems

Permadur Large Plate Handling Systems are designed to handle Non-Magnetic Materials and Steel Plates with 3/16″ to 2″ thickness, offering the following options:

  • Radio Remote Controls
  • Built-in Sit Down Legs
  • Audible Low Vacuum Alarms
  • Water Traps
  • Extra LED Warning lights on both sides of the System Load Beam
  • Electrically or Air Powered

Permadur Series 612

This Permadur Series 612 Large Plate Handling System is built with 12ea. TP-2000 Lifting Magnets on a 36’ load beam. The Magnet rows can be adjusted along the length of the load beam and the Magnets can be repositioned on the Crossarms. The Controller pictured provides Selectivity by Row, 6ea.

The Controller also offers Permadur’s Exclusive Safety Indicator Lighting System that confirms that the Magnets have attached to the load in preparation for a safe lift. This System attaches to a Single Hook Hoist via a 6 Part Sling Assembly. The power supply for this System is an “On Board” 24VDC Battery Power Supply that provides approx. 400 Lifts between recharging.

permadur heavy plate handling series 612 controls

Let us do the heavy lifting.

Permadur’s experienced engineering staff is always available to answer your questions about vacuum lifting devices, permanent lifting magnets, and other lifting systems.

Call  908-359-9767 to speak to a Permadur representative today, or fill out our inquiry form.

General Inquiries & Quote Requests

Please submit your information below and a Permadur Customer Service Representative will review the request and contact you shortly.

[contact-form-7 404 "Not Found"]