One of Permadur's strengths is the ability to custom design and build multiple Magnet Handling Systems that take into consideration the specific application needs of their customer. Permadur's patented Electrically Controlled Permanent Magnets enable us to build systems that:
Will not drop a suspended load due to loss of electrical power, faulty wiring or misoperation of controls.
Requires no back up battery system. Consumes no power during lift
Provide the operator with positive feedback that the Magnets have transferred their FULL field to the load in preparation for a safe lift.
One man plate handling increases productivity.
Provide 100% duty cycle (no down time for magnet cooling)
Provide extra capacity (typically a 4 to 1 safety factor) to prevent loss of load
Provide single plate handling off a stack and will not pick up burn table support slats.
Optional self contained Systems through the use of an on board rechargeable Battery Power Supply.
Require significantly lower Electrical Power Supply requirements than competitive electro or electroperm magnets.
Provide dependable relay analog control systems that can be maintained in the field by the customer
No installation cost
Unaffected by cold temperatures
Available in KIT form with Load Beam drawings
Pictures are of a Permadur Series 816 Large Plate Handling System
