Electrically Controlled Permanent Magnets

Key Features:

  • Won't Drop Suspended Load due to loss of electrical power, faulty wiring, misoperation of controls.
  • ON/OFF Pusbutton Controls
  • (-1E) Nicad Battery Power Supply, EXCLUSIVE to Permadur Magnets, supports continuous Magnet usage with its Spare Battery Pack and External Smart/Fast Charger. The Magnet does not need to be taken out of service to recharge battery pack. Battery packs provide 300-400 Lifts between recharging.
  • Rated Safe Working Load (SWL) provides 2 to 1 Safety Factor based on Hot Rolled Surface
  • 100% Duty Cycle (no down time for magnet cooling)
  • Magnets provide operator with positive feedback that magnetic field has been absorbed by the load in preparation for a safe lift.
  • No electrical power consumed during lift
Bipolar Magnets: For Rounds, Angles, Structural, and Plate Applications

BP-500 with
(-1E) Controller

BP-250 with
(-1E) Controller
Rectangular Magnets: For Sheet, Plate, and Block Applications

TP-2000 with
(-1E) Controller

TP-4000 with
(-1E-RR) Controller

FP-4000 with
(-1-RR) Controller
Home | Electro-Perm Magnets | Manual Magnets | Plate Handling Systems | Multiple Part Handling Systems | Vacuum Systems | Loadpositioners